Although this may seem challenging at first, there are certain techniques that will help you clean the bottom of the pool. Any type of pollution under the water surface requires a proper cleaning tool, and the dirt can be removed with equipment or by hand. Algae growth in the pool area is also a common problem, but with the right tools, it can be solved quickly. If you also need to clean the bottom of an outdoor pool, the following tips can help you.
Table of Contents
What Are the Options When You Need to Clean the Bottom of the Pool?
Before the summer season, it is advisable to carry out a thorough cleaning and maintenance of the pool, to guarantee yourself the fun of swimming. However, contamination often occurs in the pool during use, as dust, twigs and plant leaves can easily get into the water. This could prompt you to clean the bottom of the pool and keep it clean too. To do this, you have some options, such as using a sand filtration system, respectively a pump or manual cleaning methods.
Each option has its pros and cons, and timely action can be critical. For example, in case of algae growth, it is often necessary to use the appropriate antidotes to prevent such contaminants from settling to the bottom of the pool. However, these are a natural part of any water basin in the garden area.
If your outdoor pool is located in a windy area, strong winds can also lead to frequent debris deposits in the pool. If you don’t keep the water surface covered in winter, you may even end up with nasty bird droppings inside. Fortunately, you don’t necessarily have to drain the pool in order to clean the bottom of the pool. Here are some tried and true cleaning techniques and remedies you can use to get the job done without much hassle.
Opt for a Pool Robot to Clean the Bottom of the Pool Easily
Nowadays, the fully automatic vacuum robots are available not only for the households, but also for the pool area. The devices, like their counterparts, focus on scanning the pool floor and cleaning it as thoroughly as possible. However, there are some important factors to consider when using such modern technologies.
Pool robots work with filters and are more useful for fine debris such as sand in the pool. Still, you will need to run your pool’s filter for a while before you can use the device for optimal cleaning. The installation and cleaning processes can also be influenced by various factors. Otherwise, pool robots can be handy helpers.
What Tools Can You Use to Clean the Bottom of the Pool Manually?
For coarse debris or pieces of debris, manual cleaning is a better alternative. Even if you don’t need to remove a certain amount of debris, you should occasionally scrub the bottom and sides of your pool with a broom or pool brush. In this way you will prevent algae growth and other dirt deposits, as these can stick below the water surface. It is recommended to carry out the cleaning after using a filter and a pump.
To remove coarse debris, you need a device known as a plastic leaf rake. Using such a plastic rake will prevent scratching of vinyl liners and the bottom of the pool. If you’re removing algae while cleaning the pool floor, you’ll need a brush, and the bristles are essential. If your pool is made of concrete, you can use metal or stainless steel brushes. However, for more delicate flooring such as vinyl flooring or tile, you should scrub with a softer brush with nylon bristles.
What Tricks Can You Use to Clean the Pool Bottom?
- A simple and clever way to remove oil stains and dirt deposits from the bottom of the pool is with tennis balls. You can just throw them in the pool so they can absorb contaminants like oil. However, once they get dirty, you should either replace the tennis balls with new ones or wash them. Another cleaning trick is to use cleaning gloves to remove dirt from specific areas of the bottom.
- For this you need a telescopic pole and a microfiber glove, which you can use to clean the bottom of the pool. If necessary, attach the cleaning glove with an elastic band and use it to wipe away stubborn stains. However, you have to rinse out the cleaning glove several times to remove any dirt buildup. This is a convenient cleaning method, but it might be a little more tedious and time-consuming.
- You can also fill an old glove with chlorine and then place it on the stained area for some time, which you then scrub.
- Shaving cream can also reduce the amount of scrubbing required to remove the stain. Just apply shaving cream or foam and clean the area after some time.
Tips for Maintaining Pool Cleanliness
- The most important thing when cleaning pool algae, dirt, sand and other debris is to use the right cleaning tool. Algae in swimming pools can be resistant to chlorine. Don’t leave brown algae in the pool to minimize the risk of skin problems and even lung problems.
- Pool bottom contamination can’t always be prevented, but regular maintenance can be a good preventive measure.
- Try to cover the pool when not in use, a pool cover is the best way to keep out debris. In addition, such covers also keep out bird droppings and prevent dust and leaves from reaching the water surface.
- Washing your feet beforehand is also an effective measure to prevent dirt and dust from getting into the pool water.
- Catch leaves and dirt with a pool net in good time so that they do not end up on the bottom.
- Check the pH of your pool occasionally to prevent bacterial growth and algae formation.