Air coolers are appliances, without which we can not feel comfortable and able to work productively during hot weather. Regular removing the dust, bacteria and mold from these devices are crucial for ensuring the purity and quality of the air we breathe. Do you know how to clean coolers depending on the stage of their contamination to live and work in a healthy and pleasing environment? Let’s see…
Table of Contents
What is the Best Way to Clean a Cooler?
Removing the dust and impurities requires a few actions, and following them regularly, can keep your appliance in optimal condition. Here’s a step-by-step guide how to clean coolers:
- Turn off and unplug the device: Safety is most important! Before to start the cleaning process, make sure the cooler is switched off from the power.
- Empty the appliance: Empty the water reservoir and be sure it’s dry before removing dust and other impurity particles from the appliance.
- Disjoint removable parts: Take away any removable parts like trays, filters, and drip pans. This will make it simpler to wash each component entirely.
- Wash with mild detergent: Utilize a dissolved mild detergent or a mixture of warm water and vinegar to remove the dust and impurities from the interior and exterior surfaces of the cooler. Wipe down everywhere, without ignoring the fan blades, vents, and buttons. Do not apply harsh chemicals, which could destroy the device or leave behind residues harmful to your health.
- Wash filters and trays: In case the cooler has filters or drip trays, clean them detached, with water and a soft brush. Remove disposable filters if necessary, or clean and reinstall reusable ones.
- Rinse completely: After finishing, rinse all parts with running water to be sure that no detergent residue is left behind.
- Dry entirely: Leave all parts to air dry entirely, and then the device can be reassembled.
- Reassemble and switch on: Once every part is dried out, reassemble the appliance and try how it works. Run it for a few minutes to make sure everything is correct.
Can Black Mold Grow in Coolers?
Coolers are sometimes a perfect environment for black mold growing, because they may provide moist conditions. This is unfavorable for health, so it’s vital to solve this problem immediately. There is a special way how to clean coolers’ black mold:
- Wear safety gear: You should wear gloves, a mask, and defending eyewear to prevent the harmful effect of mold spores.
- Install it isolated and ventilate: Install the cooler in a well-ventilated area to minimize the spread of mold spores. If you have the chance, clean the appliance in the yard or on a balcony.
- Clean the mold: Apply a solution of water with white vinegar or hydrogen peroxide to clean moldy surfaces. Scrub the infected places with a brush or cloth. For tough infections, you can also utilize baking soda water solution to treat with this paste.
- Disinfect everywhere: After the mold is gone, disinfect the device surfaces by careful cleaning with a solution of 1 part bleach to 10 parts water. Ensure to rinse thoroughly with cold water, after that.
- Clean separately the parts: Take out and clean filters, trays, and other removable parts, one by one. Throw off the disposable parts, and clean reusable ones with the same solutions against mold.
- Dry out entirely: Check whether all parts are completely dry before reunite the device.
How to Clean Coolers: Best Way to Remove Bacteria and Mold
If you have to cope with bacteria or mold that has infected the inside of your cooler, it’s substantial to cope with the situation as soon as possible. Here’s the best way to clean them out of your device:
- Safety protection: Put on defending gear with gloves, a mask, and goggles to prevent from direct contact with bacteria and mold.
- Empty and ventilate the device: Empty the appliance of its content and replace it in a well ventilated spot, the best place is outdoors.
- Scrub with mold solution: Apply a commercial mold cleaner or a homemade solution of water and white vinegar or hydrogen peroxide to scrub the moldy surfaces. Check to be sure you have reached all crevices and corners.
- Rinse and disinfect the surfaces: Rinse the appliance entirely with water to remove the residues and the cleaning solution. Then disinfect the cleaning areas with a diluted solution from 1 part bleach and 10 parts water.
- Clean all the parts: Take away all filters, trays, and other removable parts, and wash them utilizing the prepared cleaning and disinfecting solutions. Let them dry entirely before to reassemble the appliance.